SafeTSolutions=20 1 Day Confined Space Reassessment Course. Competencies=20 Issued BCCCM1001C & BCCCM2009B.

This=20 course reassess competencies as per 2 day confined space course.

SafeTSolutions=20 1.5 or 2 Day Confined Space Reassessment Course. Competencies=20 Issued: BCCCM1001C, BCCCM2009B, PMAOMIR217A & = PMAOHS216B as=20 appropriate

To be=20 reassessed to the same level as the 3 day Confined Space course attend = the one=20 day Confined Space reassessment course as above as well as the half day=20 breathing apparatus and half day gas monitoring courses facilitated=20 separately..

SafeTSolutions=20 2 Work in Confined Space course.=20 Competencies issued: BCCCM1001C = &=20 BCCCM2009B.

SKILLS AND KNOWLEDGE

This describes the essential skills and knowledge, required = for=20 completion of this course. Upon completion participants must be able to demonstrate a knowledge=20 of:

=95 The appropriate Commonwealth and/or State/Territory OHS=20 legislation

=95 State and Territory interpretations of a confined=20 space

=95 Worksite hazards

=95 Site and equipment safety = requirements

=95 Personal protective equipment and = clothing

=95 Worksite Signage

=95 Potential accidents and injuries

=95 Company procedures and regulations

=95 OH&S policies and procedures

=95 Appropriate emergency response and evacuation = procedures

=95 Materials Safety Data Sheets and materials handling=20 methods

=95 Communication devices and common = terminology

=95 JSA's/Safe work method statement

=95 Confined space entry and exit procedures, risks and=20 regulations

=95 Air contaminants and toxic gases

=95 Breathing apparatus and limitations

=95 Equipment types, characteristics, technical capabilities = and=20 limitations

=95 Operational, maintenance and basic diagnostic=20 procedures

=95 Site isolation and site control responsibilities and=20 authorities

=95 Atmospheric monitoring devices

ELEMENTS from Nationally Recognised competency = covered in this=20 course

PERFORMANCE CRITERIA

1. Follow safe work practices = (BCCCM1001C)

1.1 Tasks are performed in a safe manner and in=20 accordance

with legislative requirements, enterprise policies=20 and

procedures

1.2 Organisation of duties, tools, equipment and = materials=20 are

performed in accordance with enterprise=20 procedures

1.3 Personal protective equipment and clothing is worn,=20 used

and stored according to enterprise=20 procedures

1.4 Plant and equipment guards are used in accordance=20 with

manufacturers specifications and=20 regulations

1.5 Safety signs and symbols are identified and=20 followed

2. Assess risks (BCCCM1001C)

2.1 Hazards in the work area are identified, assessed=20 and

reported to designated = personnel

2.2 OH&S issues and risks in the work area are=20 identified,

assessed and reported to designated=20 personnel

2.3 Safe workplace procedures and safe work instructions=20 are

followed for controlling risks

2.4 OH&S, hazard, accident or incident reports are=20 completed

according to workplace procedures and=20 State/Territory

legislation

3. Follow emergency procedures = (BCCCM1001C)

3.1 Appropriate personnel are identified in the event of=20 an

emergency

3.2 Safe workplace procedures for dealing with=20 accidents,

fires and emergencies are followed within scope=20 of

responsibilities

3.3 Emergency and evacuation procedures are practiced=20 and

carried out when required

1. Plan and prepare (BCCCM2009B)

1.1 Work instructions, including plans, specifications,=20 quality

requirements and operational details relevant to the=20 tasks

are obtained, confirmed and applied to the allotted=20 task

1.2 Safety requirements are obtained from the site safety = plan

and organisational policies and procedures, confirmed = and

applied to the allotted task

1.3 Authorisation (entry permit) to enter the confined = space=20 is

obtained in accordance with regulatory=20 requirements

1.4 Emergency response procedure is confirmed with=20 the

stand-by person

1.5 Signage and barrier requirements are identified=20 and

obtained from the project plan and=20 implemented

1.6 Tools and equipment selected to carry out tasks=20 are

consistent with the requirements of the job, checked=20 for

serviceability and any faults are rectified or=20 reported

1.7 Environmental protection requirements are identified=20 from

the project environmental management plan,=20 confirmed

and applied to the allotted = task

1.8 Rescue equipment as required by the entry permit=20 is

positioned close to the point of entry

2. Enter and work in the confined space=20 (BCCCM2009B)

2.1 Access cover is removed or opened as=20 required

2.2 Confined space is entered according to agreed=20 procedure

2.3 Atmosphere is tested and monitored for harmful=20 elements

in accordance with organisations=20 procedures

2.4 Communication is maintained with the stand-by=20 person

2.5 Designated work in confined space complies with=20 entry

permit requirements

2.6 Allocated entry time is monitored and adhered=20 to

3. Exit confined space (BCCCM2009B)

3.1 Confined space is exited according to agreed=20 procedure

3.2 Tools, equipment and materials are recovered from=20 the

confined space

3.3 Access cover is replaced or closed as=20 required

3.4 Tagging and lock-out procedures are applied as=20 required

3.5 Confined space entry log is completed

4. Clean up (BCCCM2009B)

4.1 Work area is cleared and materials disposed of=20 or

recycled in accordance with project=20 environmental

management plan

4.2 Tools and equipment are cleaned, checked,=20 maintained

and stored in accordance with=20 manufacturers'

recommendations and standard work=20 practices

4.3 Barriers and signs are removed, cleaned and = stored

SafeTSolutions=20 3 Day Work in Confined Space Course. Competencies Issued: = BCCCM1001C,=20 BCCCM2009B, PMAOMIR217A=20 & PMAOHS216B

REQUIRED SKILLS AND KNOWLEDGE

This describes the essential skills and knowledge, required = for=20 completion of this course. Upon completion of this course participants will be able to = demonstrate a knowledge of:

=95 The appropriate Commonwealth and/or State/Territory OHS=20 legislation

=95 State and Territory interpretations of a confined=20 space

=95 Worksite hazards

=95 Site and equipment safety = requirements

=95 Personal protective equipment and = clothing

=95 Worksite Signage

=95 Potential accidents and injuries

=95 Company procedures and regulations

=95 OH&S policies and procedures

=95 Appropriate emergency response and evacuation = procedures

=95 Materials Safety Data Sheets and materials handling=20 methods

=95 Communication devices and common = terminology

=95 JSA's/Safe work method statement

=95 Confined space entry and exit procedures, risks and=20 regulations

=95 Air contaminants and toxic gases

=95 Breathing apparatus and limitations

=95 Equipment types, characteristics, technical capabilities = and=20 limitations

=95 Operational, maintenance and basic diagnostic=20 procedures

=95 Site isolation and site control responsibilities and=20 authorities

=95Atmospheric monitoring devices

=95Air contaminants and toxic gases - As may be relevant to = the=20 plant/site/process, knowledge of the following may be=20 required:

=95 common chemical asphyxiants including: hydrocarbons, = carbon=20 dioxide, carbon monoxide, hydrogen cyanide, and hydrogen=20 sulphide

=95 common irritants and corrosives including: chlorine, = ammonia and=20 acid bases

=95 common flammable gases including: acetylene, petroleum, = methane,=20 ethane, propane and butane

=95 narcotics

=95 (explosive range, upper and lower explosive=20 limits)

=95 exposure standards (time weighted average, short term = exposure=20 limits, peak limitation values, examination of = toxic

effect at the level of a range of flammable=20 gases

=95 conditions under which atmospheres become=20 hazardous

=95 units of measurement used to express concentration of = atmospheric=20 contaminants (mg/cubic m. ppm, % v/v).

=B7 =20 Underpinning gas monitoring skills must include = interpretation and=20 communication of the results of sampling.

=95 Breathing apparatus and limitations - competence must be = demonstrated=20 in accordance with AS/NZ 17151716:

=95 appropriate conduct of pre-donning = tests

=95 correct donning of breathing = apparatus

=95 operation of breathing apparatus

=95 movement in conditions or reduced = visibility

=95 breathing apparatus emergency = procedures

=95 organisation's procedures are = followed

=95 correct removal of breathing = apparatus

=95 return of breathing apparatus to operational status=20

=B7 =20 Underpinning knowledge required of = the

=95 respiratory system, effects of irrespirable atmospheres = on the=20 body, protective equipment

=95 characteristics, component parts, operation of = compressed air=20 breathing apparatus

=95 operational testing, standard operating procedures and = safe work=20 practices when wearing breathing apparatus

=95 operating breathing apparatus

=95 use of the distress signal unit

=95 use of the breathing apparatus control equipment=20

=95 use of procedures, personal lines and=20 tallies.

=95Ability to:

=95 Assess vital signs of casualty

=95 Demonstrate correct procedures for performing CPR using a = manikin,=20 including standard precautions

=95 Call an ambulance

=95 Call for medical assistance

=95 Identify and minimise hazards to health and safety of self = and others=20 in the immediate workplace or community = environment

=95 Report details of incident and CPR as = provided

=95 Use infection control procedures, including standard=20 precautions

ELEMENTS from Nationally Recognised competency = covered in this=20 course

PERFORMANCE CRITERIA

1. Follow safe work practices (BCCCM1001C = Follow OH&S policies and procedures )

1.1 Tasks are performed in a safe manner and in=20 accordance

with legislative requirements, enterprise policies=20 and

procedures

1.2 Organisation of duties, tools, equipment and = materials=20 are

performed in accordance with enterprise=20 procedures

1.3 Personal protective equipment and clothing is worn,=20 used

and stored according to enterprise=20 procedures

1.4 Plant and equipment guards are used in accordance=20 with

manufacturers specifications and=20 regulations

1.5 Safety signs and symbols are identified and=20 followed

2. Assess risks (BCCCM1001C Follow OH&S policies and procedures )

2.1 Hazards in the work area are identified, assessed=20 and

reported to designated = personnel

2.2 OH&S issues and risks in the work area are=20 identified,

assessed and reported to designated=20 personnel

2.3 Safe workplace procedures and safe work instructions=20 are

followed for controlling risks

2.4 OH&S, hazard, accident or incident reports are=20 completed

according to workplace procedures and=20 State/Territory

legislation

3. Follow emergency procedures (BCCCM1001C = Follow OH&S policies and procedures)

3.1 Appropriate personnel are identified in the event of=20 an

emergency

3.2 Safe workplace procedures for dealing with=20 accidents,

fires and emergencies are followed within scope=20 of

responsibilities

3.3 Emergency and evacuation procedures are practiced=20 and

carried out when required

1. Plan and prepare (BCCCM2009B Work in confined spaces)

1.1 Work instructions, including plans, specifications,=20 quality

requirements and operational details relevant to the=20 tasks

are obtained, confirmed and applied to the allotted=20 task

1.2 Safety requirements are obtained from the site safety = plan

and organisational policies and procedures, confirmed = and

applied to the allotted task

1.3 Authorisation (entry permit) to enter the confined = space=20 is

obtained in accordance with regulatory=20 requirements

1.4 Emergency response procedure is confirmed with=20 the

stand-by person

1.5 Signage and barrier requirements are identified=20 and

obtained from the project plan and=20 implemented

1.6 Tools and equipment selected to carry out tasks=20 are

consistent with the requirements of the job, checked=20 for

serviceability and any faults are rectified or=20 reported

1.7 Environmental protection requirements are identified=20 from

the project environmental management plan,=20 confirmed

and applied to the allotted = task

1.8 Rescue equipment as required by the entry permit=20 is

positioned close to the point of = entry

2. Enter and work in the confined space = (BCCCM2009B Work in confined spaces)

2.1 Access cover is removed or opened as=20 required

2.2 Confined space is entered according to agreed=20 procedure

2.3 Atmosphere is tested and monitored for harmful=20 elements

in accordance with organisations=20 procedures

2.4 Communication is maintained with the stand-by=20 person

2.5 Designated work in confined space complies with=20 entry

permit requirements

2.6 Allocated entry time is monitored and adhered = to

3. Exit confined space (BCCCM2009B Work in confined spaces)

3.1 Confined space is exited according to agreed=20 procedure

3.2 Tools, equipment and materials are recovered from=20 the

confined space

3.3 Access cover is replaced or closed as=20 required

3.4 Tagging and lock-out procedures are applied as=20 required

3.5 Confined space entry log is completed

4. Clean up (BCCCM2009B Work in confined spaces)

4.1 Work area is cleared and materials disposed of=20 or

recycled in accordance with project=20 environmental

management plan

4.2 Tools and equipment are cleaned, checked,=20 maintained

and stored in accordance with=20 manufacturers'

recommendations and standard work=20 practices

4.3 Barriers and signs are removed, cleaned and = stored

1. Prepare for gas testing. (PMAOMIR217A Gas Test=20 Atmosphere)

1.1 Determine type of gas/atmosphere to be=20 tested

1.2 Select and calibrate equipment in accordance with = procedures

1.3 Determine gas testing regime/sampling pattern=20 required

1.4 Identify hazards from possible atmosphere=20 contaminants

1.5 1.5 Implement hazard control measures, including = use=20 of

appropriate personal protective=20 equipment.

2. Test gas. (PMAOMIR217A Gas Test=20 Atmosphere)

2.1 Use gas testing equipment to test gas as=20 required

2.2 Interpret and report = readings

2.3 Monitor gas on an ongoing basis as=20 required

2.4 Take required action(s) if readings are=20 unacceptable.

3. Maintain equipment. (PMAOMIR217A Gas Test=20 Atmosphere)

3.1 Clean and maintain gas testing equipment in = accordance=20 with

procedures

3.2 Inspect and fault find monitoring equipment in = accordance=20 with

procedures

3.3 Return gas testing equipment to required location = and=20 in

required condition

3.4 Maintain records of tests and results in = accordance=20 with

procedures.

1. Conduct pre-donning checks and tests on breathing = apparatus.=20 (PMAOHS216B Operate breathing apparatus)

1.1 Inspected breathing apparatus for immediate use = in=20 accordance with procedures

1.2 Report/record faulty or damaged equipment in = accordance=20 with procedures.

2. Operate breathing apparatus. (PMAOHS216B Operate=20 breathing apparatus)

2.1 Identify, monitor and control hazards in = accordance with=20 the

procedures

2.2 Establish and maintain communication with=20 appropriate

personnel throughout the = activity

2.3 Demonstrate effective application of breathing=20 apparatus,

undertaking activities as a member of a team, in=20 accordance

with procedures

2.4 Implement entrapment procedures in accordance=20 with

procedures

2.5 Maintain personal safety at all=20 times.

3. Conclude operations. (PMAOHS216B Operate=20 breathing apparatus)

3.1 Close down breathing apparatus set in accordance=20 with

procedures

3.2 Remove breathing apparatus set in accordance with = procedures

3.3 Undertake after use cleaning and maintenance of=20 breathing

apparatus in accordance with = procedures

3.4 Make equipment ready for operational use in = accordance=20 with

procedures.

1. Respond to signs of an unconscious casualty = (HLTCPR201A Perform CPR)

1.1 Identify hazards to health and safety of = self=20 and

others

1.2 Minimise immediate risk to health and safety=20 of

self, casualty and others by isolating any=20 hazard(s)

1.3 Approach the casualty in a calm, culturally=20 aware,

sensitive and respectful manner

1.4 Assess vital signs of = casualty

1.5 Recognise the need for CPR

2. Perform CPR (HLTCPR201A Perform CPR)

2.1 Perform CPR in line with ARC=20 Guidelines

2.2 Seek assistance from others and/or=20 ambulance

support as appropriate

3. Communicate details of the incident (HLTCPR201A Perform CPR)

3.1 Request ambulance support or appropriate=20 medical

assistance and/or ambulance support = using

available means of = communication

3.2 Accurately convey details of casualty=92s=20 condition

and CPR procedures performed to = emergency

services/relieving personnel

3.3 Calmly provide information to reassure=20 casualty,

adopting a communication style to match=20 the

casualty=92s level of = consciousness

3.4 Provide reports, where applicable, in a=20 timely

manner, presenting all relevant facts relating=20 to

performing CPR according to = established

procedures

2. Prepare extinguishing media and/or equipment for = use (From=20 PUAFIR203A Respond to urban fire)

3. Nominated extinguishing media and or equipment=20 is

identified, obtained and/or = accessed

4. Extinguishing media and equipment are used=20 in

accordance with the manufacturers=92 specifications = and=20 the

organisation=92s procedures

Confined=20 Space Course content mapping against AS2865:2009 Core Training=20 Elements

GUIDANCE=20 FOR THE PROVISION OF TRAINING AND COMPETENCY = ASSESSMENT as=20 per AS 2865

Competencies=20 included in SafeTSolutions = course(s)

Core=20 training

element

Performance=20 criteria

Broad=20 roles

(Refer=20 to Paragraph D2)

Covered=20 in SafeTSolutions Learning Guide

Competency=20 Performance criteria for SafeTSolutions course=20

National=20 Competencies covered by =20 SafeTSolutions courses

1.=20 Demonstrate an

understanding=20 of

legislation,

standards=20 & codes

of=20 practice

relevant=20 to

confined=20 spaces.

1.1=20 Identify legislation, standards and codes of practice relevant to=20 designers, manufacturers, installers, modifiers and users of=20 confined

spaces.

1.2=20 Describe the responsibilities and obligations relevant to=20 designers,manufacturers, installers, modifiers and users of = confined=20 spaces.

a,=20 b, c, d, e, f

P121

1.1=20 Tasks=20 are performed in a safe manner and in accordance with legislative=20 requirements, enterprise policies and = procedures

1.2=20 Organisation=20 of duties, tools, equipment and materials are performed in = accordance with=20 enterprise procedures

1.4=20 Plant=20 and equipment guards are used in accordance with manufacturers=20 specifications and regulations

1.5=20 Safety=20 signs and symbols are identified and followed

BCCCM1001C

2.=20 Identify the

criterion=20 that

defines=20 confined

spaces

2.1=20 Describe the physical and inherent hazards of confined=20 spaces.

2.2=20 Identify the risks of exposure to the inherent hazards of confined = spaces=20 and the potential health and safety effects.

2.3=20 Identify confined spaces in the workplace.

a,=20 b, c, d, e, f

a,=20 b

P33-35,

P39,=20 P62-74

P13=20 =9616

2.1=20 Hazards=20 in the work area are identified, assessed and reported to = designated=20 personnel

2.2=20 OH&S=20 issues and risks in the work area are identified, assessed and = reported to=20 designated personnel

1.4=20 Identify hazards from possible atmosphere=20 contaminants

1.5=20 Implement hazard control measures, including use of appropriate = personal=20 protective equipment.

2.3=20 Atmosphere=20 is tested and monitored for harmful elements in accordance with=20 organisations procedures

1.1=20 Tasks=20 are performed in a safe manner and in accordance with legislative=20 requirements, enterprise policies and procedures (ID Confined=20 Space)

BCCCM1001C

PMAOMIR217A

BCCCM2009B

BCCCM1001C

3.=20 Assess risks

associated=20 with

entering=20 and

conducting=20 tasks

in=20 or on a

confined=20 space.

3.1=20 Demonstrate knowledge of the principles of risk=20 management.

3.2 Conduct a risk = assessment of=20 the inherent hazards of a confined

space.

3.3=20 Conduct a risk assessment of the task related hazards of a=20 confined

space.

3.4=20 Document risk assessments conducted.

3.5=20 Participate in the risk assessment process.

3.6=20 Demonstrate knowledge of when risk assessments need to be reviewed = and=20 revised.

3.7=20 Identify sources of information on confined spaces=20 hazards,

associated=20 risks and risk control measures.

a,=20 b, c, d, e, f

b,=20 c, f

b,=20 c, d, e, f

b,=20 c, f

a,=20 b, c, f

P34-50

2.1=20 Hazards=20 in the work area are identified, assessed and reported to = designated=20 personnel

2.2=20 OH&S=20 issues and risks in the work area are identified, assessed and = reported to=20 designated personnel

1.1 = Determine=20 type of gas/atmosphere to be tested

1.3 = Determine gas=20 testing regime/sampling pattern required

1.4=20 Identify hazards from possible atmosphere=20 contaminants

1.5=20 Implement hazard control measures, including use of appropriate = personal=20 protective equipment.

2.2=20 OH&S=20 issues and risks in the work area are identified, assessed and = reported to=20 designated personnel

1.1=20 Tasks=20 are performed in a safe manner and in accordance with legislative=20 requirements, enterprise policies and procedures =

1.1=20 Work=20 instructions, including plans, specifications, quality = requirements and=20 operational details relevant to the tasks are obtained, confirmed = and=20 applied to the allotted task

1.2=20 Safety=20 requirements are obtained from the site safety plan and = organisational=20 policies and procedures, confirmed and applied to the allotted=20 task

1.5=20 Signage=20 and barrier requirements are identified and obtained from the = project plan=20 and implemented

1.6=20 Tools=20 and equipment selected to carry out tasks are consistent with the=20 requirements of the job, checked for serviceability and any faults = are=20 rectified or reported

1.7=20 Environmental=20 protection requirements are identified from the project = environmental=20 management plan, confirmed and applied to the allotted=20 task

BCCCM1001C

PMAOMIR217A

BCCCM2009B

BCCCM1001C

BCCCM2009B

4.=20 Identify and

implement=20 risk

control=20 measures.

4.1=20 Identify risk control measures in accordance with the hierarchy of = risk=20 control.

4.2=20 Describe methods for the isolation of potentially hazardous = services=20 connected to confined spaces.

4.3=20 Describe methods of cleaning, purging and ventilating confined=20 spaces.

4.4=20 Demonstrate an understanding of atmospheric testing and/or = monitoring=20 equipment and techniques.

4.5=20 Describe how monitoring results are documented, interpreted and=20 communicated.

4.6=20 Demonstrate knowledge of confined space authorised entry=20 requirements.

4.7=20 Demonstrate knowledge of practices and procedures for conducting = tasks in=20 or on the confined space.

4.8=20 Demonstrate knowledge of the risk control measures applicable to = the entry=20 and the conduct of tasks in or on the confined=20 space.

4.9=20 Evaluate the effectiveness of risk control measures.=20

4.10=20 Demonstrate knowledge of the correct selection, use and = maintenance of=20 personal protective equipment to be used in the confined=20 space.

4.11=20 Describe the communication system between persons inside=20 and

outside=20 the confined space.

a,=20 b, c, d, e, f

a,=20 b, c, f

b,=20 c, f

b,=20 c, d, f

b,=20 c, f

b,=20 c, d, e, f

b,=20 c, d, f

b,=20 c, d, e, f

b,=20 c, f

b,=20 c, d, e, f

P37

P37=20 & 125

P128

P59-71

P53-57

P51-52

P37,=20 P53-57

P47-50

P29-31

P30=20 & P87

2.3=20 Safe=20 workplace procedures and safe work instructions are followed for=20 controlling risks

2.4=20 OH&S,=20 hazard, accident or incident reports are completed according to = workplace=20 procedures and State/Territory legislation

3.4=20 Tagging=20 and lock-out procedures are applied as required

1.1=20 Work=20 instructions, including plans, specifications, quality = requirements and=20 operational details relevant to the tasks are obtained, confirmed = and=20 applied to the allotted task

1.2 = Safety=20 requirements are obtained from the site safety plan and = organisational=20 policies and procedures, confirmed and applied to the allotted=20 task

1.2=20 Select and calibrate equipment in accordance with=20 procedures

1.3=20 Determine gas testing regime/sampling pattern=20 required

1.5=20 Implement hazard control measures, including use of appropriate = personal=20 protective equipment.

2.2=20 Interpret and report readings

2.3=20 Monitor gas on an ongoing basis as required

2.4=20 Take required action(s) if readings are=20 unacceptable.

1.3=20 Authorisation=20 (entry permit) to enter the confined space is obtained in = accordance with=20 regulatory requirements

1.1=20 Work=20 instructions, including plans, specifications, quality = requirements and=20 operational details relevant to the tasks are obtained, confirmed = and=20 applied to the allotted task

1.2=20 Safety=20 requirements are obtained from the site safety plan and = organisational=20 policies and procedures, confirmed and applied to the allotted=20 task

2.1=20 Access=20 cover is removed or opened as required

2.2=20 Confined=20 space is entered according to agreed = procedure

2.3=20 Atmosphere=20 is tested and monitored for harmful elements in accordance with=20 organisations procedures

2.4=20 Communication=20 is maintained with the stand-by person

2.5=20 Designated=20 work in confined space complies with entry permit=20 requirements

2.6=20 Allocated=20 entry time is monitored and adhered to

2.3=20 Safe=20 workplace procedures and safe work instructions are followed for=20 controlling risks

1.2=20 Organisation=20 of duties, tools, equipment and materials are performed in = accordance with=20 enterprise procedures

1.3=20 Personal=20 protective equipment and clothing is worn, used and stored = according to=20 enterprise procedures

1.4=20 Plant=20 and equipment guards are used in accordance with manufacturers=20 specifications and regulations

1.5=20 Safety=20 signs and symbols are identified and = followed

4.2=20 Tools=20 and equipment are cleaned, checked, maintained and stored in = accordance=20 with manufacturers' recommendations and standard work=20 practices

2.4=20 Communication=20 is maintained with the stand-by person

BCCCM2009B

PMAOMIR217A

BCCCM2009B

BCCCM1001C

BCCCM2009B

5.=20 Apply

emergency

response

procedures.

5.1=20 Demonstrate an understanding of emergency response=20 procedures.

5.2=20 Demonstrate knowledge of stand-by duties and=20 responsibilities.

5.3=20 Demonstrate knowledge of emergency response duties and=20 responsibilities.

5.4=20 Demonstrate knowledge of the correct selection, use and = maintenance of=20 personal protective equipment to be used in=20 emergency

response.

c,=20 d, e, f

91-104

P92-93,=20 P122

P92-P104

P81-89

3.2=20 Safe=20 workplace procedures for dealing with accidents, fires and = emergencies are=20 followed within scope of responsibilities

1.4=20 Emergency=20 response procedure is confirmed with the stand-by=20 person

3.3=20 Emergency=20 and evacuation procedures are practiced and carried out when=20 required

3.1=20 Appropriate=20 personnel are identified in the event of an=20 emergency

3.3=20 Emergency=20 and evacuation procedures are practiced and carried out when=20 required

1. Respond to signs of an unconscious=20 casualty

2.=20 Perform CPR

3.=20 Communicate details of the incident

1.1=20 Inspected breathing apparatus for immediate use in accordance with = procedures

2.2=20 Establish and maintain communication with appropriate personnel = throughout=20 the activity

2.3=20 Demonstrate effective application of breathing apparatus, = undertaking=20 activities as a member of a team, in accordance with=20 procedures

2.4=20 Implement entrapment procedures in accordance with=20 procedures

2.5=20 Maintain personal safety at all times

3.1=20 Close down breathing apparatus set in accordance with=20 procedures

3.2=20 Remove breathing apparatus set in accordance with=20 procedures

3.3=20 Undertake after use cleaning and maintenance of breathing = apparatus in=20 accordance with procedures

3.4=20 Make equipment ready for operational use in accordance with=20 procedures.

1.8=20 Rescue=20 equipment as required by the entry permit is positioned close to = the point=20 of entry

BCCCM1001C

BCCCM2009B

BCCCM1001C

HLTCPR201A

PMAOHS216B

BCCCM2009B

D2=20 IDENTIFYING KEY COMPETENCY REQUIREMENTS =96 AS 2986 = 2009

There are=20 many methods for identifying the key competencies that a person may need = to=20 enable them to conduct their role associated with confined spaces. A = person may=20 need competencies within the following broad = roles:

(a)=20 Design, manufacture, install or modify a confined = space.

(b)=20 Participate in confined space risk management = process.

(c)=20 Control confined space hazards.

(d) Enter=20 and conduct tasks in or on a confined space.

(e)=20 Participate in confined spaces stand-by role (initiate rescues=20 procedures).

(f)=20 Participate in emergency response.

There may=20 be specific roles that may not fall within the broad roles given above. = These=20 will need to be taken into account when determining the competency = requirements=20 for these specific roles.